Apns

Cricket Wireless APN Settings – Step by Step Configuration

 

  1. Tap Settings > Mobile Networks (or Mobile Data) > Access Point Names > New APN(may have to tap Menu button to see this option).
  2. Create a new APN profile with the following details.
    • Name: Internet
    • APN: ndo
    • Proxy: Not Set
    • Port: Not Set
    • Username:Not Set
    • Password: Not Set
    • Server: Not Set
    • MMSC: http://mmsc.aiowireless.net
    • MMS Proxy: proxy.aiowireless.net
    • MMS Port: 80
    • MCC: 310
    • MNC: 150
    • Authentication type:Not Set
    • APN type: default,mms,fota,hipri,supl
  3. Tap Save for the new APN
  4. Go back one screen to the APN list and tap the dot to enable this APN
  5. Reboot your android device and there you have it. Try testing your data and MMS picture messaging with the new APN.

If the above doesn’t work for you, we have an alternative cricket wireless apn settings for you to try.

Alternative Cricket APN Settings

  1. Go toMenu -> Settings -> Wireless & Networks -> Mobile networks -> Access Point Names -> New APN and type the below parameters.
  2. Create a new APN using the following details:
    • Name: Cricket
    • APN:internet
    • Proxy: wap.mycricket.com
    • Port: 8080
    • Username: yourphonenumber@mycricket.com
    • Password: cricket
    • Server: wap.mycricket.com
    • MMSC: http://mms.mycricket.com/servlets/mms
    • MMS Proxy: wap.mycricket.com
    • MMS Port: 8080
    • MCC: 310
    • MNC: 004
    • Authentication Type: PAP or CHAP
    • APN type: internet
  3. Save the new apn settings and choose it as your default settings.
  4. Reboot your device and test if data and picture messaging is working for you.

Cricket APN Settings for Blackberry

If you are using a Cricket blackberry device, then follow the below instructions to setup your cricket wireless apn settings for blackberry.

  1. Go to Options -> Advanced Settings -> TCP
    and enter the following details
  2. APN: internet
  3. Username: yourphonenumber@mycricket.com
  4. Password: cricket

Hope it works. Please don’t forget to leave your comments and working apn settings below.

 

ESTA ES PARA H20

APN NameH2O

APNAPNPRODATA

ProxyPort80

UsernamePasswordServer

MMSChttp://mmsc.mobile.att.net

MMS Proxyproxy.mobile.att.net

MMS Port80

MCC310

MNC410

Authentication TypePAP

APN Typedefault,mms,supl,hipri

APN Protocol

APN Roaming

ProtocolBearer

MVNO

TypeAlternate

 

Net10 AT&T APN service

If the one you are running on is AT&T, please enter the following values on the APN:

Name: net10
APN: tfdata
MMSC: http://mms-tf.net
MMS proxy: mms3.tracfone.com
MMS port: 80

The rest of the fields can be left empty

 

Net10 T-Mobile APN service

If on the other hand your net 10 service is based on T-Mobile network, use these values instead:

Name: net10
APN: wap.tracfone
MMSC: http://mms.tracfone.com
MMS proxy: Leave in blank
MMS port: 8080

Again, rest of the fields should be left empty

 

Android SIMPLE MOBILE- Internet and MMS

  1. Pull down the notifications screen & tap on Settings
  2. Tap on Mobile Data (some phones say “more”
  3. Tap Mobile Networks (some phones have “Access Point Names” here)
  4. Tap Access Point Names
  5. Press the menu button
  6. Select New APN
    • Name:SIMPLE Mobile
    • APN: simple
    • Proxy:<Not set>
    • Port:<Not set>
    • Username:<Not set>
    • Password:<Not set>
    • Server:<Not set>
    • MMSC:http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS Proxy:<Not set>
    • MMS Port:<Not set>
    • MCC: 310
    • MNC: 260
    • APN Type: default,supl,mms,admin
    • If no APN settings are present, a restore to factory default settings may be required.
  7. Select Menu and Save
  8. Go back one screen to the APN list and tap on the dot to Enable the SIMPLE Mobile APN
  9. Restart phone & you’re set!
  10. These settings have been tested to work with the Galaxy S3 and the HTC One S

Android SIMPLE MOBILE- Internet and MMS

From the home screen

  1. Press Menu
  2. Select “Settings”
  3. Select “Wireless & networks”
    • Check that “Airplane mode” and “Wi-Fi” are unchecked
  4. Select “Mobile networks”
    • Check that “Data enabled” is checked.
  5. Select “Access Point Names”
  6. Delete all existing APNs
    • Select APN
    • Press Menu
    • Select “Delete APN”
  7. Create new APN
    • Press Menu
    • Select “New APN”
    • Enter the following information:
      • Name: SIMPLE Mobile
      • APN*: simple
      • Proxy: <Not set>
      • Port: <Not set>
      • Username: <Not set>
      • Password: <Not set>
      • Server: <Not set>
      • MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
      • MMS Proxy: <Not set>
      • MMS Port: <Not set>
      • MCC: 310
      • MNC: 260
      • Authentication Type: <Not set>
      • APN type: <Not set>
      • *Case sensitive
      • Press Menu
      • Select “Save”

Twitter